BES fulfils all your water meter and air flow meter requirements.
Batching Systems can be single or multi channel generally incorporating a Flow meter, Batch Controller or preset counter and a Control Valve(s). The system operates via the controller that has the capability to be preset on the required quantity.When the start button is depressed the controller signals the valve to open (and if required the pump to start) allowing product to flow through the meter generating a signal relative to quantity. When the specified amount has passed through the meter the controller signals the valve to shut down (and the pump to stop). This is a full batch cycle that can be repeated after the controller is reset.
Some examples of typical Batch
Systems are shown below:-
Fast delivery of large or small quantities of product is possible with GPI Industrial Turbine Flowmeters.
eg: Our
GPI stainless steel 25mm turbine has a flow range from 25 - 250 lt/min.
range of Positive Displacement Flowmeters have the ability to handle a
wide range of fluid viscosities with excellent levels of repeatability and
durability. 
