The BES high speed batching system has been specifically packaged as an installation-ready metering assembly suitable for the most common of liquid transfer applications throughout industry.

The batching of small to large volumes of water or similar viscosity liquids is a common requirement within many industries. Typical applications are found in the manufacture of car care products, food & beverage solutions, adhesives, building   products, cosmetics, pharmaceutical, paint & chemicals.

Incorporating our GPI G series industrial series Stainless Steel Turbine Flow meter & Solenoid which are supplied coupled and wired to the integral Batch Controller ready for installation [3/4" system only]. Remote controller for high temperature applications

 
SPECIFICATIONS:

Flow range for 3/4" system:  8 - 87 lt/min 
Flow range for 1" system:  25 - 250 lt/min
Flow range for 1-1/2" system:  67 - 670 lt/min
Max pressure 10 Bar 
Temperature Range to 107°C
Large 8 digit LC Display.
Counts Up or Down 
Accuracy ± 0.5%
Automatic Over run Compensation
Power supply required: 24 Vdc

The BES high speed batching system has been specifically packaged as an installation-ready metering assembly suitable for the most common of liquid transfer applications throughout industry.

The batching of small to medium volumes of water or similar low viscosity liquids is a common requirement within many industries. Typical applications are found in the manufacture of car care products, food & beverage solutions, adhesives, building products, cosmetics, pharmaceutical, paint & chemicals.

Inferential brass flow meter with integral strainer & solenoid valve are supplied close coupled and wired to the integral batch controller ready for installation, simply pipe in and connect power and the system is ready to use. 

Preset values, Batch total & Accumulated total are displayed on a large LCD display. Operation is prompted by scrolling text, smaller LCD text prompts annunciate the status of the batch controller at each phase of the batch process.