""

Home / Our Range of Water Meters / BES Water Meters Range

BES Water Meters Range

 
  • DUAL PULSE INSERTION METER

    The Dual pulse insertion flow transducer is an innovative design combining well proven technology with modern engineering materials to provide a cost and simple means of measuring the flow of water and a wide variety of low viscosity liquids. Two versions available, the standard model DP490S suitable for pipe diameters from 40 – 900mm and the hot tap version model DP525S suitable for pipe diameters from 50 – 2500mm. The Dual Pulse flowmeter can be supplied as a pulsed output version or fitted with integral instrumentation. eg Totaliser, Rate Totaliser or Batch Controller.

    FEATURES

    • All stainless steel construction
    • Suits pipes 40~2500mm
    • Low installed cost
    • Simple to install Water Meter
    • Unique head design to extend linear measuring range
    • Two independent pulse outputs with high noise immunity (CE compliant)
    • High pressure submersible design
    • Hot tap option

    Click here for Dual Pulse pdf Data sheet

    Click the button for Dual Pulse installation Manual

    Click here for PDF →

     
  • WP-Dynamic Turbine Water meter

    The WP Dynamic water meter is one of the most accurate, robust and reliable helical water meters on the market, and is suited to the measurement of high, constant flow rates. The WP-Dynamic mechanical water meter is exclusively certified to the National Measurement Institute NMI M 10-1 for Meters Intended for the Metering of Water in Full Flowing Pipes.

    Available for cold water applications up to 50 deg C, with sizes ranging from DN40 through to DN400 covering flow rates from .45 m3/hour right up to 1000 m3/hour.
    WPD is accurate and long-lasting. Reliable quality workhorse for bulk metering or billing purposes.

    FEATURES

    • Hermetically sealed register (IP68)
    • High overload capability
    • Powder coated body for maximum durability
    • Australian Standard lengths
    • Test certificates can be provided if required
    • Pulser option available

    Click here for WP-Dynamic Turbine Water meter pdf Data sheet

     
  • Turbo-IR-A

    The Turbo IR water meter is a good choice for many irrigation applications. Suitable for cold water applications up to 40 degree C, with a wide variety of sizes available from DN50 up to DN300, to suit a range of different applications.
    The Turbo-IR meter reduces the risk of blockage and damage caused by pipeline debris. The TURBO-IR-A uses a multi-blade plastic paddle, mounted at the top of the water passage where disturbance from solids suspended in the water is minimal, permitting accuracy of metering in water containing up to 30% solid debris. The paddle wheel design prevents jamming and damage from solid debris. Flowrate can also be seen with the use of the Optional Electronic register. This economical flowmeter is an ideal choice for wastewater and irrigation applications.

    Click here for Turbo-IR-A pdf Data sheet

     
 
 
Menu