BES Flowmeters

 GPI Industrial Turbine Meters                            HOME

 Next 1 2 3 4 5

 
INDUSTRIAL TURBINE FLOWMETERS

 

 

 

GPI G Series Precision Turbine Flowmeters [below] are manufactured for industrial and sanitary applications. All stainless steel construction with tungsten carbide or high density plastic bearing structures. Flowmeters are available in many configurations with pulsed outputs or with Electronic Instrumentation.

 

TM Series Water Meter available in PVC on Page 5, and O1N Economy series in Nylon. See Page 2

 

See Page 3 for G2 Industrial Series Turbines available in Stainless steel, Brass, Aluminum & PVDF with computer display. All available with a variety of electronics & see the Commercial grade meters on Page 4.

 

Please contact BES Flowmeters to assist in the selecting the right product for your application.

GPI G Series Precision Turbine Flowmeters

 

 

The G Series Precision Turbines are available From 1/2" - 3" Dia with NPTM connections and flow ranges from 2.2 - 2270 Lt/min. With excellent levels of repeatability the GPI Precision Turbines can be utilised for all water based applications.

Meter construction: Stainless steel body & rotors with  tungstan carbide bearings [GNT series] & PTFE bearings [GNP series]

 

 

 

GPI Turbines can be supplied with Standard two wire pick-up, connector and cable assembly and weather proof cover as shown.

 

 

GPI G Series Precision Turbines with Magnetic Pick-ups

 

See the Precision Meter data sheet for full details

G Series Precision Meter with ANSI 150 lb Flanges

 

GPI Precision Turbine model GFT-200 with pick-up and weather proof cover. The 2" (50mm) Turbine has a large flow range and can be installed into applications were fast and accurate delivery of product is essential.

Flow Range: 125 - 1250 Lt/min
Construction: 316 stainless steel
Connection: ANSI 150lb
Max Temp: 107 Deg C

G Series Precision Turbines with Sanitary Clamp Connections
Sanitary meters are designed and manufactured in accordance with 3A Sanitary Standards. This Turbine is complete with pick-up and

GPI Precision Turbines are available with Sanitary Clamp connections and are used in process applications where high accuracy is required without 3-A approval. These meters are available in sizes from 1/2", 3/4", 1", 1-1/2" & 2" dia and can be supplied with the full range of Electronic options.


GPI Precision Sanitary Meters are designed and manufactured in accordance with 3A Sanitary Standards and are available in: 1",  1-1/2" & 2"  Diameter.

See the Sanitary Meter data sheet for full details

 

 G Series Precision Turbines with  R100 battery powered Rate Indicator

 
GPI Precision Turbine with hand held R100 battery powered Rate Indicator. The R100 can display rate of flow from all size turbines with standard 2 pin magnetic pick up and high frequency output flowmeters. Ideal pocket instrument for testing.

 

 

For additional information on any products please contact:   sales@besflowmeters.com.au

 Next 1 2 3 4 5