|
The MPB Series 3000 range
of Variable Area Flowmeters presents an economical means of
accurate flow measurement. A scale length of 260mm offers
excellent resolution giving easily read scale graduations.
Recent additions to this
range now offer the very desirable feature of handling flow
rates as low as 50cc/min Air. A complete range of twelve new
high accuracy low flow ranges have now been added to this model.
All the recently added
flow tubes utilise a “free float” design which has a very low
pressure drop.
The MPB Series 3000 is now
an ideal flowmeter for use as a calibration master, or where
high accuracy with a good resolution scale is required for the
most demanding of variable area flow applications.
The materials of
construction offer compatibility to a wide range of industrial
process mediums.
The end connections can be
supplied in either stainless steel or rigid PVC.
The units are fitted with
a calibrated scale plate. In addition, a metric scale is
permanently fired onto the tube. A useful blank scale plate can
also be provided for customers own calibration if required.
The 3000 Series can be
used to measure the flow rate of most process gases and liquids.
A wide range of tubes is
available for the MPB Series 3000 from as low as 50cc/min Air up
to 3,000 L/min Air. Other ranges up to 125 L/min are also
available.
One or two economical
latching Hi and Lo alarm devices can be fitted. These enable
the alarms to remain activated whilst flow is above or below a
set point. This reduces expensive electronic circuitry and is
ideal for remote and process control applications.
In addition, a good
selection of the ranges can be fitted with alarms for air
applications.
A rear of panel mounting kit is available complete with bezel.
SERIES 3000 FEATURES
- DIRECT READING OF
INSTANTANEOUS FLOW RATES
- FLOW RATES AS LOW AS
50CC/MIN AIR ARE AVAILABLE
- ECONOMICAL LATCHING
ALARM(S)
- INTEGRAL SAFETY COVER
- METRIC SCALES
- PVC OR STAINLESS
STEEL CONNECTIONS ARE AVAILABLE AS STANDARD
- TUBE ASSEMBLY EASILY
REMOVED AND REPLACED IN-SITU
- HIGH RESOLUTION
SCALES FOR MAXIMUM ACCURACY
- PLAIN SCALE PLATE FOR
CUSTOMER CALIBRATION CAN BE SUPPLIED
- WIDE RANGE OF
STANDARD FLOW RATES
- LIGHTWEIGHT
CONSTRUCTION
- ROBUST DESIGN
- GUIDED FLOATS OR
“FREE FLOATS” ARE USED ON ALL RANGES GIVING STABLE READINGS
- CAN BE SUPPLIED WITH
FLANGES
- IN-LINE OR PANEL
MOUNTING
3000 VARIABLE AREA FLOWMETER
|
Chassis: |
Anodised aluminium to BS 1615/AA25 |
|
End Blocks: |
Rigid PVC or Stainless steel |
|
Process Connections: |
½”,
¾” & 1” BSPPF |
|
Cover: |
Acrylic |
|
Seals: |
Nitrile or Viton |
|
Metering Tube: |
Borosilicate glass with metric permanently fired scale |
|
Scale: |
Adjustable calibrated scale (blank scale if required)
|
|
Floats: |
Stainless steel, Hard anodised aluminium |
|
Weight: |
1250
grams (typical) |
|
Maximum Working Pressure: |
Gas: 10 bar g (non shock)
Liquid: 12 bar g (non shock) |
|
Maximum Working Temperature: |
60°C
Nitrile
100°C Viton |
|
Accuracy: |
± 5%
FSD predicted, or better by series calibration |
|
Optional Alarm: |
Rating: 100V max. 1 amp max.
10VA max. Resistive load
Contacts N/O |
|
Connection: |
2
metre flying lead |
STANDARD RANGES
|
AIR
@ 1013 mbar abs 20°C |
WATER |
WATER |
|
5 -
50 cc/min
10 - 100 cc/min
25 - 250 cc/min
100 - 1000 cc/min
0.25- 2.5 L/min
0.5 - 5 L/min
0.75- 7.5 L/min
1.0 - 10 L/min
1.5 - 15 L/min
2.5 - 25 L/min
3 - 30 L/min
5 - 50 L/min
10 - 100 L/min
15 - 150 L/min
20 - 200 L/min
25 - 250 L/min
50 - 500 L/min
75 - 750 L/min
100 - 1000 L/min
150 - 1500 L/min
22 - 2250 L/min
300 - 3000 L/min |
2.5
- 25 L/min
5.0 - 50 L/min
7.5 - 75 L/min
10 - 100 L/min
12 - 125 L/min |
150
- 1500 l/hr
300 - 3000 l/hr
450 - 4500 l/hr
600 - 6000 l/hr
750 - 7500 l/hr |
Customised flow ranges are
available. Please consult BES Flowmeters to select the required
flow range for the process fluid.
Our Sales Team look forward to hearing from you! Tel: +61 3 5956
8685.
Due to the
constant development and improvement of products, information
may be altered or withdrawn without notice.
|
