Products

HomeShopB.E.S. Flow MetersDual Pulse Insertion Flow Meter

Dual Pulse Insertion Flow Meter

The Dual pulse stainless steel insertion flow transducer is a cost effective and simple means of measuring the flow of water and a wide variety of low viscosity liquids. Two versions available, the standard model DP490S suitable for pipe diameters from 40 – 900mm and the hot tap version model DP525S suitable for pipe diameters from 50 – 2500mm. The Dual Pulse flowmeter can be supplied as a pulsed output version or fitted with integral instrumentation. eg Totaliser, RT14 Rate Totaliser or EB11 Batch Controller shown opposite.

 

Description

The Dual pulse insertion flow transducer is a cost effective option and simple means of measuring the flow of water and a wide variety of low viscosity liquids. Two versions available, the standard model DP490S suitable for pipe diameters from 40 – 900mm and the hot tap version model DP525S suitable for pipe diameters from 50 – 2500mm. The Dual Pulse flowmeter can be supplied as a pulsed output version or fitted with integral instrumentation. eg Totaliser, Rate Totaliser or Batch Controller. A quadrature pulse option is available for bi-directional flow measurement.

The DP meter is a great economical method to measure large flow rates in a wide range of pipe diameters. It is simple and cost effective to install and can be used on all hot and cold water applications and with its all stainless steel construction and IP68 (NEMA6) submersible rating. The installation of the DP490S utilises a 1-1/2″ BSPF socket while the Hot tap version the DP525S utilises a 2″ BSPF socket. A saddle clamp connection with the appropriate fitting is also an easy option for installing the Dual Pulse Insertion Flow Transducer into a range of pipe diameters.

 

 

 

Additional information

Product

chemicals, fuel, solvent, water