The Kobold MIM Magnetic Flow Meter is a compact In line Flow Meter that utilises the latest Kobold Electromagnetic Flow Meter Technology. The MIM meter in a range of sizes is designed to measure and monitor small and medium flows from 0.03 lt/min up to 350 lt/min. Suitable for the most common water based conductive liquids transfer applications throughout industry. The MIM housings material and electrodes are stainless steel with Peek insulation parts. Flow information is shown on a TFT display that is built into the housing making it an extremely compact design. Allowing for quick and easy installation with male screwed connections. The meter requires a regulated 24Vdc power source and is supplied with a 3m cable and connector assembly.
The MIM meter displays flow and temperature measurement and can also be configured as a Batch (Dosing) Controller. Refer to Technical Data sheet below and operating manual for full function details of the MIM meter and available sizes. Typical applications are found in many manufacturing industries. This includes car care products, food & beverage solutions, agricultural, building products, cosmetics, pharmaceutical & chemicals and many more.
This Inline Flow Meter operates according to the electromagnetic measurement principle. According to Faraday’s Law of magnetic induction, a voltage is induced in a conductor moving through a magnetic field. The electrically conductive measuring agent acts as the moved conductor. The voltage induced in the measuring agent is proportional to the flow velocity and is therefore a value for the volumetric flow. The flowing media must have a minimum conductivity. The induced voltage is picked up by two sensing electrodes which are in contact with the measuring agent and sent to the measuring amplifier with the flow rate being calculated based on the cross sectional area of the pipe.
