When it comes to measuring liquid flow accurately in industrial applications, positive displacement and turbine flow meters are two of the most trusted and widely deployed technologies available. Both are reliable, well-proven, and capable of high accuracy — but they are designed for very different conditions.

Selecting the wrong type for your application can result in measurement drift, premature wear, or unnecessary maintenance costs. Here’s how to tell them apart and which to choose.

How a Positive Displacement Flow Meter Works

A positive displacement flow meter measures flow by directly trapping a fixed, known volume of fluid and counting how many times that volume passes through the meter. The measurement is volumetric and direct — not inferred from velocity or pressure.
The most common PD design for industrial liquid measurement is the oval gear flow meter. Two precisely machined oval gears rotate in a metering chamber; as fluid passes through, the gears trap and release an exact volume per rotation. The accumulated rotations equal the total volume passed.
This is the operating principle behind the Flomec OM Series — one of the most widely used oval gear meters in Australian industry, designed and manufactured in Australia for water, diesel, petrol, chemical, and food-grade liquid applications.
Positive displacement meters are suitable for:

  • Clean Viscous fluids — oils, fuels, syrups, hydraulic fluids
  • Batch dispensing and custody transfer applications for clean water and viscous products
  • Low to moderate flow rates where high accuracy is critical
  • Installations where no upstream straight pipe run is available

How a Turbine Flow Meter Works

Turbine flow meters measure velocity, not volume directly. As fluid passes through the meter body, it spins a lightweight rotor. The speed at which the rotor turns is directly proportional to the fluid velocity — magnetic sensors detect each rotation and convert the signal into a flow rate reading.
Turbine meters deliver excellent accuracy with clean, low-viscosity fluids such as water and light process liquids. The BES Turbo IR is a proven turbine meter purpose-built for industrial water measurement across Australian operations, offering reliable pulse output for integration with SCADA, batch controllers, and remote monitoring systems.
Turbine flow meters are best suited for:

  • Clean, low-viscosity liquids — water, light chemicals, process fluids
  • Higher flow rates where minimising pressure drop is important
  • Water distribution, cooling systems, irrigation, and utilities metering
  • Applications requiring pulse or frequency output for control system integration

Key Differences at a Glance

FeaturePositive DisplacementTurbine
Measurement typeVolumetric (direct)Velocity (inferred)
Fluid typeClean Products from Water to high viscosityClean, low viscosity
Accuracy±0.2–0.5%±0.5–1%
Upstream straight pipe neededNoYes (typically 10× pipe diameter)
Viscosity sensitivityMinimalPerformance decreases with high viscosity
Ideal applicationsWater, fuels, oils, chemicals, batchingWater, HVAC, process liquids, utilities

Which Meter Should You Choose?

Choose a positive displacement flow meter if:

  • Your fluid is viscous, or its viscosity changes with temperature
  • You need billing-grade, custody-transfer, or batch accuracy
  • You’re dispensing fuels, oils, or chemicals where every litre counts
  • Your installation doesn’t allow for straight pipe upstream
  • See Product Overview Video below for Flomec Oval Gear Flow Meter.
Flomec EGM
Flomec EGM series Positive Displacement Flowmeter

Choose a turbine flow meter if:

  • Measuring clean water or light process liquids with high flow rates
  • Material of construction: Stainless Steel, Aluminum or PVDF 
  • Sizes 1/2″ – 2″ Dia with threaded or sanitary clamp connections
  • Flow rates from 3.8 – 760 lt/min with minimise pressure loss
  • Local battery operated display or with IS option
  • Pulse output for a batch controller or SCADA system is required
  • You’re installing across a large site and cost-efficiency matters
  • See Product Overview Video below for Flomec G2 Series Turbine Meter.
Flomec G2 600x600 1
Flomec G2 Series Turbine Flowmeter

Applications Across Australian Industry

Positive displacement meters are standard in diesel and fuel dispensing, chemical dosing, hydraulic systems, food and beverage processing, and any process where fluid volume needs to be accounted for precisely.

Turbine meters are the preferred choice for water utilities, irrigation systems, cooling towers, HVAC applications, and industrial process monitoring — wherever clean water or light liquid flow needs to be tracked reliably at volume.

Both technologies have decades of proven performance in Australian industrial environments. BES Flowmeters has supplied and supported both meter types across the country since 1986, and our team can help you identify the right specification for your exact application and fluid conditions.

Frequently Asked Questions

Turbine meters can handle light oils, but performance becomes unreliable as viscosity increases. For diesel, fuel oils, or hydraulic fluids — particularly where temperature causes viscosity variation — a positive displacement oval gear meter will deliver significantly more consistent accuracy.

Many PD meters can operate mechanically without power, using a mechanical register for local flow display. Models with digital readout or pulse output require power, but the core measurement mechanism itself is passive and does not need electricity.

Oval gear is one specific PD design — others include rotary piston, nutating disc, and spur gear. Oval gear meters are the most widely used for industrial liquid applications because of their accuracy, broad fluid compatibility, and low maintenance requirements. The Flomec OM Series is a well-recognised example available through BES Flowmeters.

Meter sizing is based on your expected flow rate range. A general rule of thumb is that your normal operating flow should sit between 20% and 80% of the meter’s maximum rated capacity. It should be noted however that high viscosity products will reduce the maximum flow rate of the selected Oval Gear meter because of increased pressure drop when metering viscous products. Contact BES Flowmeters with your fluid type, flow rate range, pipe size, and operating pressure and we’ll recommend the correct model and size for your process.

BES Flowmeters has been supplying industrial flow measurement equipment across Australia since 1986. We stock Flomec oval gear meters, the BES Turbo IR turbine meter, and a full range of turbine and positive displacement flow meters for industrial, commercial, and process applications.

Contact our team or request a quote for fast, application-specific advice.